Honda Rebel 500
2024 | cruiser
Checking device garage…
View my garageVisual reference
Side profile
- Seat height
- 690 mm
- Wheelbase
- 1,490 mm
- Wet weight
- 191 kg
- Category
- cruiser
Listing links may earn Rider Height a commission.
- Asset
- Pending
- Dimensions
- -
- License
- -
- Source
- -
Honda
Rebel 500
Saved builds stay on this device.
The name stays private. Editing it after a save prepares another new build.
Rider
Rider position
Slide the rider on the seat to fit this bike. Saved per bike.
Posture
Adjustments
Ergonomics
Modeled band: Comfortable
Geometry verification: Partially verified
Data basis: Published specs · calibrated or reviewed rider contacts
Layout basis: Photo-calibrated
Rider contacts were calibrated for this motorcycle, but may remain unverified.
All contacts reached
Lowest modeled angle area: Knee.
Physical check: Sit on the exact motorcycle and compare seat, bar, peg, and ground-reach feel before deciding. This model does not predict comfort or control.
Data provenance
Where these numbers came from
Every populated geometry field records its source, verification state, and source link when available. These records feed both the simulator and the fit recommendation engine.
- Geometry status
- Partially verified
- Field records
- 15
- Recorded verified
- 6/15
- Linked sources
- 15/15
Six modeled contact coordinates
6/6 populated · 6/6 records · 1/6 recorded verified · 6/6 linked
Seat, grip, and peg X/Y coordinates drive the posture model. Specification seat height is a separate catalog value.
- Seat
- X 446 mm · Y 690 mm
2/2 records · 2/2 linked
1/2 recorded verified - Grips
- X 953 mm · Y 1,051 mm
2/2 records · 2/2 linked
0/2 recorded verified - Pegs
- X 822 mm · Y 255 mm
2/2 records · 2/2 linked
0/2 recorded verified
Check on the bike: At a test-sit, prioritize the seat, grips, and pegs positions; one or more of those modeled coordinates is not recorded as verified.
Wheelbase
Chassis
1,490 mm
Recorded verifiedHonda publishes a 1,490 mm wheelbase for the European 2024 CMX500 Rebel.
Ground clearance
Chassis
125 mm
Recorded verifiedHonda publishes 125 mm ground clearance for the European 2024 CMX500 Rebel.
Seat contact X
Rider triangle
446 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Seat contact height
Rider triangle
690 mm
Recorded verifiedHonda publishes a fixed 690 mm seat height for the European 2024 CMX500 Rebel.
Seat length
Rider triangle
250 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Handlebar X
Rider triangle
953 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Handlebar height
Rider triangle
1,051 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Handlebar width
Controls
800 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Foot peg X
Rider triangle
822 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Foot peg height
Rider triangle
255 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Seat height minimum
Adjustability
690 mm
Recorded verifiedHonda publishes a fixed 690 mm seat height for the European 2024 CMX500 Rebel.
Seat height maximum
Adjustability
690 mm
Recorded verifiedHonda publishes a fixed 690 mm seat height for the European 2024 CMX500 Rebel.
Wet weight
Physical
191 kg
Recorded verifiedHonda publishes a 191 kg kerb weight for the European 2024 CMX500 Rebel.
Front tire outer diameter
Rendering
640 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Rear tire outer diameter
Rendering
646 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Bike-level reference: https://powersports.honda.com/motorcycle/cruiser/rebel-500
Does the Honda Rebel 500 fit you?
The Honda Rebel 500 (2024) lists a 690 mm seat height. In this simplified seat-height model, an inseam around 69 cm is a rough ground-reach reference, not a guarantee of flat-footing. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change foot contact. Enter your measurements above to compare the modeled reach, then confirm it on the motorcycle.
Riding position
The Honda Rebel 500's cruiser category suggests a relaxed, feet-forward stance as a modeled starting point. The simulator estimates knee, hip, and elbow angles from the available geometry and your measurements so you can compare the reach to the bars and pegs.
Typical category use
The cruiser category is commonly associated with relaxed, low-seat cruising with a feet-forward stance and easy reach to the ground. Rider Height does not assess handling, performance, or whether this motorcycle is suitable for a particular rider.
Fit figures are planning estimates from the current geometry and simplified model assumptions. They are not safety, compatibility, or purchase advice; confirm fit on the actual motorcycle.
Kit it out
Affiliate links — riderheight.com may earn a commission on purchases made through these links, at no extra cost to you. Fitment marked “check fitment” was not explicitly confirmed for this exact bike on the source page.
- Rox Speed FX — 1.5in bar back risers (Rebel 300/500/1100)fitment verifiedView
Bikes similar to the Honda Rebel 500
Other cruiser motorcycles with the closest seat heights — compare their fit in the simulator.