Sur-Ron Ultra Bee HP
2025 | electric
Checking device garage…
View my garageVisual reference
Side profile
- Seat height
- 910 mm
- Wheelbase
- 1,380 mm
- Wet weight
- 89 kg
- Category
- electric
Listing links may earn Rider Height a commission.
- Asset
- Pending
- Dimensions
- -
- License
- -
- Source
- -
Sur-Ron
Ultra Bee HP
Saved builds stay on this device.
The name stays private. Editing it after a save prepares another new build.
Rider
Rider position
Slide the rider on the seat to fit this bike. Saved per bike.
Posture
Adjustments
Ergonomics
Modeled band: Comfortable
Geometry verification: Partially verified
Data basis: Published specs · estimated rider contacts
Layout basis: Generic fallback
Generic rider contacts are not measured for this model or category.
All contacts reached
Lowest modeled angle area: Knee.
Physical check: Sit on the exact motorcycle and compare seat, bar, peg, and ground-reach feel before deciding. This model does not predict comfort or control.
Data provenance
Where these numbers came from
Every populated geometry field records its source, verification state, and source link when available. These records feed both the simulator and the fit recommendation engine.
- Geometry status
- Partially verified
- Field records
- 19
- Recorded verified
- 3/19
- Linked sources
- 19/19
Six modeled contact coordinates
6/6 populated · 6/6 records · 0/6 recorded verified · 6/6 linked
Seat, grip, and peg X/Y coordinates drive the posture model. Specification seat height is a separate catalog value.
- Seat
- X 690 mm · Y 910 mm
2/2 records · 2/2 linked
0/2 recorded verified - Grips
- X 1,049 mm · Y 1,090 mm
2/2 records · 2/2 linked
0/2 recorded verified - Pegs
- X 773 mm · Y 545 mm
2/2 records · 2/2 linked
0/2 recorded verified
Check on the bike: At a test-sit, prioritize the seat, grips, and pegs positions; one or more of those modeled coordinates is not recorded as verified.
Wheelbase
Chassis
1,380 mm
Sur-Ron owner manual YQ5A-NA-V1.4 (issue 2025.12.1), printed page 13.9, lists a 1380 mm wheelbase for Ultra bee T NA-25 (Offroad), vehicle model QL6000DY-A. https://sur-ron.co.uk/ultra-bee-hp/ identifies the 2025 Ultra Bee HP and corroborates 54.3 in within its displayed precision. Loaded measurement conditions are unknown; other regions, road-legal variants, and later models are not established.
Ground clearance
Chassis
315 mm
Sur-Ron owner manual YQ5A-NA-V1.4 (issue 2025.12.1), printed page 13.9, lists 315 mm ground clearance for Ultra bee T NA-25 (Offroad), vehicle model QL6000DY-A. https://sur-ron.co.uk/ultra-bee-hp/ identifies the 2025 Ultra Bee HP and corroborates 12.4 in within its displayed precision. Loaded measurement conditions are unknown; other regions, road-legal variants, and later models are not established.
Seat contact X
Rider triangle
690 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Seat contact height
Rider triangle
910 mm
Provisional recordManually entered from published specs for the live fallback catalog; not independently verified.
Seat length
Rider triangle
230 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Handlebar X
Rider triangle
1,049 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Handlebar height
Rider triangle
1,090 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Handlebar width
Controls
790 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Foot peg X
Rider triangle
773 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Foot peg height
Rider triangle
545 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger seat X
Passenger
566 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger seat height
Passenger
965 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger peg X
Passenger
649 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger peg height
Passenger
730 mm
Provisional recordRider contact point estimated from category proportions until side-profile landmarks are authored.
Seat height minimum
Adjustability
910 mm
Sur-Ron owner manual YQ5A-NA-V1.4 (issue 2025.12.1), printed page 13.9, lists one 910 mm seat height for Ultra bee T NA-25 (Offroad), vehicle model QL6000DY-A. https://sur-ron.co.uk/ultra-bee-hp/ identifies the 2025 Ultra Bee HP and corroborates 35.8 in within its displayed precision. No adjustable range or loaded measurement condition is established; other regions, road-legal variants, and later models are not established.
Seat height maximum
Adjustability
910 mm
Provisional recordManually entered from published specs for the live fallback catalog; not independently verified.
Wet weight
Physical
89 kg
Provisional recordManually entered from published specs for the live fallback catalog; not independently verified.
Front tire outer diameter
Rendering
643 mm
Provisional recordSur-Ron manual YQ5A-NA-V1.4, page 13.9, lists 80/100-19 for Ultra bee T NA-25 (Offroad), QL6000DY-A. Nominal tire-size arithmetic: 19×25.4 + 2×(80×1.00) = 642.6 mm, rounded to 643 mm. This is not a measured unloaded or loaded diameter and does not calibrate wheel contact; road-legal variants and later models are not established.
Rear tire outer diameter
Rendering
637 mm
Provisional recordSur-Ron manual YQ5A-NA-V1.4, page 13.9, lists 100/90-18 for Ultra bee T NA-25 (Offroad), QL6000DY-A. Nominal tire-size arithmetic: 18×25.4 + 2×(100×0.90) = 637.2 mm, rounded to 637 mm. This is not a measured unloaded or loaded diameter and does not calibrate wheel contact; road-legal variants and later models are not established.
Bike-level reference: https://surronelectricbikes.co.uk/ultra-bee/
Does the Sur-Ron Ultra Bee HP fit you?
The Sur-Ron Ultra Bee HP (2025) lists a 910 mm seat height. In this simplified seat-height model, an inseam around 91 cm is a rough ground-reach reference, not a guarantee of flat-footing. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change foot contact. Enter your measurements above to compare the modeled reach, then confirm it on the motorcycle.
Riding position
The Sur-Ron Ultra Bee HP's electric category suggests an upright, neutral riding position as a modeled starting point. The simulator estimates knee, hip, and elbow angles from the available geometry and your measurements so you can compare the reach to the bars and pegs.
Typical category use
The electric category is commonly associated with quiet, low-maintenance riding with instant torque. Rider Height does not assess handling, performance, or whether this motorcycle is suitable for a particular rider.
Fit figures are planning estimates from the current geometry and simplified model assumptions. They are not safety, compatibility, or purchase advice; confirm fit on the actual motorcycle.
Bikes similar to the Sur-Ron Ultra Bee HP
Other electric motorcycles with the closest seat heights — compare their fit in the simulator.