Skip to content
Rider Height
<- Comparison guides

adventure / default rider 183 cm

Benelli TRK 502 vs Zontes 350T ergonomics

Benelli TRK 502 and Zontes 350T have modeled posture scores within three points for the 183 cm default rider. Treat this as a planning estimate; posture preference, data confidence, and a real test sit still matter.

Posture overlay

The default rider's modeled seated posture on each bike, solved from the same geometry as the score panels and overlaid on one ground line so seat height and reach differences are visible at a glance.

Try with my height

Modeled fit comparison

Benelli TRK 502

Modeled scoreProvisional
95Comfortable

All contacts reached

Zontes 350T

Modeled scoreProvisional
95Comfortable

All contacts reached

The modeled scores are within three points, so the result does not distinguish a higher-scoring bike. Treat the result as a planning estimate and compare each bike's geometry confidence before a real test sit.

Rider fit: reaching the ground

The Benelli TRK 502 lists a 800 mm seat; the Zontes 350T lists 830 mm — a 30 mm difference. Seat height is only a first-pass ground-reach input. It does not establish safety or actual foot contact. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change the result.

On seat height alone, the Benelli TRK 502 has the easier modeled ground reach. Load your measurements into the simulator to compare the model, then verify both motorcycles in person.

Geometry snapshot

Geometry comparison for Benelli TRK 502 and Zontes 350T
SpecBenelli TRK 502Zontes 350T
Seat height800 mm830 mm
Wheelbase1,525 mm1,420 mm
Wet weight235 kg196 kg
Displacement500 cc348 cc

Posture metrics

Knee angle

Benelli TRK 502
Sport (65.6 deg)
Zontes 350T
Sport (65.4 deg)

Hip angle

Benelli TRK 502
Neutral (100.3 deg)
Zontes 350T
Neutral (102.5 deg)

Elbow angle

Benelli TRK 502
Relaxed (143.3 deg)
Zontes 350T
Relaxed (143.3 deg)

Torso lean

Benelli TRK 502
Neutral (10.3 deg)
Zontes 350T
Neutral (8.7 deg)

Fit by rider height

Modeled ground contact by rider height, in 5 bands from 5'2" to 6'4" (158-193 cm).

Modeled foot contact for Benelli TRK 502 and Zontes 350T by rider height
Rider heightBenelli TRK 502Zontes 350T
158 cm / 5'2"Balls of feetTiptoe only
167 cm / 5'6"Balls of feetBalls of feet
176 cm / 5'9"Both feet flatBalls of feet
184 cm / 6'0"Both feet flatBoth feet flat
193 cm / 6'4"Both feet flatBoth feet flat

Modeled from each bike's seat height and a typical inseam-to-height ratio only — not a flat-footing guarantee. Real ground contact still depends on seat shape, suspension sag, footwear, and your own proportions. Confirm on the motorcycle.

Verdict

Benelli TRK 502 and Zontes 350T are both adventure bikes, so the practical question is which of their real differences you'd actually feel. Zontes 350T is about 39 kg lighter wet than Benelli TRK 502, which tends to show up most when paddling backward out of a parking spot or picking the bike up off the sidestand. Benelli TRK 502 runs a 105 mm longer wheelbase than Zontes 350T, which typically trades some low-speed agility for extra stability at speed. The seat height gap is the biggest single difference: Benelli TRK 502 sits 30 mm lower than Zontes 350T, which usually means an easier reach to the ground for shorter riders. None of that adds up to a clear overall winner in the modeled posture score, so the individual differences above are the more useful comparison than the headline number. Treat every figure here as a planning estimate: seat width, suspension sag, footwear, and your own proportions can shift the real feel more than a few millimetres or degrees on paper. Load your height and inseam into the simulator, then sit on both before you decide.

Kit out either bike

Related comparisons

See all adventure comparisons ->