moped / default rider 183 cm
Honda Ape 50 vs Honda CT50 Motra ergonomics
Honda Ape 50 and Honda CT50 Motra have modeled posture scores within three points for the 183 cm default rider. Treat this as a planning estimate; posture preference, data confidence, and a real test sit still matter.
Modeled fit comparison
Honda Ape 50
All contacts reached
Honda CT50 Motra
All contacts reached
The modeled scores are within three points, so the result does not distinguish a higher-scoring bike. Treat the result as a planning estimate and compare each bike's geometry confidence before a real test sit.
Rider fit: reaching the ground
The Honda Ape 50 lists a 715 mm seat; the Honda CT50 Motra lists 720 mm — a 5 mm difference. Seat height is only a first-pass ground-reach input. It does not establish safety or actual foot contact. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change the result.
On seat height alone, the Honda Ape 50 has the easier modeled ground reach. Load your measurements into the simulator to compare the model, then verify both motorcycles in person.
Geometry snapshot
| Spec | Honda Ape 50 | Honda CT50 Motra |
|---|---|---|
| Seat height | 715 mm | 720 mm |
| Wheelbase | 1,185 mm | 1,125 mm |
| Wet weight | 84 kg | 81 kg |
| Displacement | 49 cc | 49 cc |
Posture metrics
Knee angle
- Honda Ape 50
- Sport (57.5 deg)
- Honda CT50 Motra
- Sport (57.4 deg)
Hip angle
- Honda Ape 50
- Neutral (99.9 deg)
- Honda CT50 Motra
- Neutral (101.4 deg)
Elbow angle
- Honda Ape 50
- Relaxed (143.3 deg)
- Honda CT50 Motra
- Relaxed (143.3 deg)
Torso lean
- Honda Ape 50
- Neutral (8.0 deg)
- Honda CT50 Motra
- Neutral (7.1 deg)