motocross / default rider 183 cm
Husqvarna Motorcycles TC 50 vs KTM 50 SX Factory Edition ergonomics
Husqvarna Motorcycles TC 50 and KTM 50 SX Factory Edition have modeled posture scores within three points for the 183 cm default rider. Treat this as a planning estimate; posture preference, data confidence, and a real test sit still matter.
Modeled fit comparison
Husqvarna Motorcycles TC 50
All contacts reached
KTM 50 SX Factory Edition
All contacts reached
The modeled scores are within three points, so the result does not distinguish a higher-scoring bike. Treat the result as a planning estimate and compare each bike's geometry confidence before a real test sit.
Rider fit: reaching the ground
The Husqvarna Motorcycles TC 50 lists a 645 mm seat; the KTM 50 SX Factory Edition lists 653 mm — a 8 mm difference. Seat height is only a first-pass ground-reach input. It does not establish safety or actual foot contact. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change the result.
On seat height alone, the Husqvarna Motorcycles TC 50 has the easier modeled ground reach. Load your measurements into the simulator to compare the model, then verify both motorcycles in person.
Geometry snapshot
| Spec | Husqvarna Motorcycles TC 50 | KTM 50 SX Factory Edition |
|---|---|---|
| Seat height | 645 mm | 653 mm |
| Wheelbase | 1,026 mm | 1,024 mm |
| Wet weight | - | - |
| Displacement | 50 cc | 50 cc |
Posture metrics
Knee angle
- Husqvarna Motorcycles TC 50
- Sport (57.2 deg)
- KTM 50 SX Factory Edition
- Sport (57.2 deg)
Hip angle
- Husqvarna Motorcycles TC 50
- Neutral (103.7 deg)
- KTM 50 SX Factory Edition
- Neutral (103.9 deg)
Elbow angle
- Husqvarna Motorcycles TC 50
- Relaxed (143.3 deg)
- KTM 50 SX Factory Edition
- Relaxed (143.3 deg)
Torso lean
- Husqvarna Motorcycles TC 50
- Neutral (5.5 deg)
- KTM 50 SX Factory Edition
- Neutral (5.4 deg)