enduro / default rider 183 cm
Husqvarna Motorcycles TE510 vs Husqvarna Motorcycles WR250 ergonomics
Husqvarna Motorcycles TE510 and Husqvarna Motorcycles WR250 have modeled posture scores within three points for the 183 cm default rider. Treat this as a planning estimate; posture preference, data confidence, and a real test sit still matter.
Modeled fit comparison
Husqvarna Motorcycles TE510
All contacts reached
Husqvarna Motorcycles WR250
All contacts reached
The modeled scores are within three points, so the result does not distinguish a higher-scoring bike. Treat the result as a planning estimate and compare each bike's geometry confidence before a real test sit.
Rider fit: reaching the ground
The Husqvarna Motorcycles TE510 lists a 980 mm seat; the Husqvarna Motorcycles WR250 lists 985 mm — a 5 mm difference. Seat height is only a first-pass ground-reach input. It does not establish safety or actual foot contact. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change the result.
On seat height alone, the Husqvarna Motorcycles TE510 has the easier modeled ground reach. Load your measurements into the simulator to compare the model, then verify both motorcycles in person.
Geometry snapshot
| Spec | Husqvarna Motorcycles TE510 | Husqvarna Motorcycles WR250 |
|---|---|---|
| Seat height | 980 mm | 985 mm |
| Wheelbase | 1,472 mm | 1,485 mm |
| Wet weight | - | - |
| Displacement | 501 cc | 249 cc |
Posture metrics
Knee angle
- Husqvarna Motorcycles TE510
- Sport (58.1 deg)
- Husqvarna Motorcycles WR250
- Sport (58.1 deg)
Hip angle
- Husqvarna Motorcycles TE510
- Neutral (93.5 deg)
- Husqvarna Motorcycles WR250
- Neutral (93.2 deg)
Elbow angle
- Husqvarna Motorcycles TE510
- Relaxed (143.3 deg)
- Husqvarna Motorcycles WR250
- Relaxed (143.3 deg)
Torso lean
- Husqvarna Motorcycles TE510
- Neutral (12.4 deg)
- Husqvarna Motorcycles WR250
- Neutral (12.5 deg)