enduro / default rider 183 cm
KTM 300 XC TPI vs Sherco 300 SE Factory ergonomics
KTM 300 XC TPI and Sherco 300 SE Factory have modeled posture scores within three points for the 183 cm default rider. Treat this as a planning estimate; posture preference, data confidence, and a real test sit still matter.
Modeled fit comparison
KTM 300 XC TPI
All contacts reached
Sherco 300 SE Factory
All contacts reached
The modeled scores are within three points, so the result does not distinguish a higher-scoring bike. Treat the result as a planning estimate and compare each bike's geometry confidence before a real test sit.
Rider fit: reaching the ground
The KTM 300 XC TPI lists a 950 mm seat; the Sherco 300 SE Factory lists 950 mm, within a few millimetres of each other. Seat height is only a first-pass ground-reach input. It does not establish safety or actual foot contact. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change the result.
Geometry snapshot
| Spec | KTM 300 XC TPI | Sherco 300 SE Factory |
|---|---|---|
| Seat height | 950 mm | 950 mm |
| Wheelbase | 1,486 mm | 1,480 mm |
| Wet weight | - | - |
| Displacement | 300 cc | 293 cc |
Posture metrics
Knee angle
- KTM 300 XC TPI
- Sport (58.1 deg)
- Sherco 300 SE Factory
- Sport (58.1 deg)
Hip angle
- KTM 300 XC TPI
- Neutral (93.2 deg)
- Sherco 300 SE Factory
- Neutral (93.3 deg)
Elbow angle
- KTM 300 XC TPI
- Relaxed (143.3 deg)
- Sherco 300 SE Factory
- Relaxed (143.3 deg)
Torso lean
- KTM 300 XC TPI
- Neutral (12.5 deg)
- Sherco 300 SE Factory
- Neutral (12.5 deg)