Skip to content
Rider Height
<- Comparison guides

enduro / default rider 183 cm

Sherco 250 SEF Factory vs Sherco 300 SE Factory ergonomics

Sherco 250 SEF Factory and Sherco 300 SE Factory land within a few ergonomic points for the default rider, so the better choice comes down to posture preference and bike category.

Fit verdict

Sherco 250 SEF Factory

95Comfortable

All contacts reached

Sherco 300 SE Factory

95Comfortable

All contacts reached

The two bikes are close enough that posture preference matters more than the overall score.

Rider fit: reaching the ground

The Sherco 250 SEF Factory has a 950 mm seat; the Sherco 300 SE Factory sits at 950 mm, within a few millimetres of each other. As a rule of thumb you flat-foot a bike when your inseam roughly matches its seat height: about 95 cm for the Sherco 250 SEF Factory and 95 cm for the Sherco 300 SE Factory.

Geometry snapshot

Geometry comparison for Sherco 250 SEF Factory and Sherco 300 SE Factory
SpecSherco 250 SEF FactorySherco 300 SE Factory
Seat height950 mm950 mm
Wheelbase1,480 mm1,480 mm
Wet weight115 kg-
Displacement248 cc293 cc

Posture metrics

Knee angle

Sherco 250 SEF Factory
Sport (58.1 deg)
Sherco 300 SE Factory
Sport (58.1 deg)

Hip angle

Sherco 250 SEF Factory
Neutral (93.3 deg)
Sherco 300 SE Factory
Neutral (93.3 deg)

Elbow angle

Sherco 250 SEF Factory
Relaxed (143.3 deg)
Sherco 300 SE Factory
Relaxed (143.3 deg)

Torso lean

Sherco 250 SEF Factory
Neutral (12.5 deg)
Sherco 300 SE Factory
Neutral (12.5 deg)