Honda Gold Wing Tour MT
2024 | touring
Checking device garage…
View my garageVisual reference
Side profile
- Seat height
- 745 mm
- Wheelbase
- 1,695 mm
- Wet weight
- 385 kg
- Category
- touring
Listing links may earn Rider Height a commission.
- Asset
- Pending
- Dimensions
- -
- License
- -
- Source
- -
Honda
Gold Wing Tour MT
Saved builds stay on this device.
The name stays private. Editing it after a save prepares another new build.
Rider
Rider position
Slide the rider on the seat to fit this bike. Saved per bike.
Posture
Adjustments
Ergonomics
Modeled band: Comfortable
Geometry verification: Partially verified
Data basis: Published specs · calibrated or reviewed rider contacts
Layout basis: Photo-calibrated
Rider contacts were calibrated for this motorcycle, but may remain unverified.
All contacts reached
Lowest modeled angle area: Knee.
Physical check: Sit on the exact motorcycle and compare seat, bar, peg, and ground-reach feel before deciding. This model does not predict comfort or control.
Data provenance
Where these numbers came from
Every populated geometry field records its source, verification state, and source link when available. These records feed both the simulator and the fit recommendation engine.
- Geometry status
- Partially verified
- Field records
- 19
- Recorded verified
- 6/19
- Linked sources
- 19/19
Six modeled contact coordinates
6/6 populated · 6/6 records · 1/6 recorded verified · 6/6 linked
Seat, grip, and peg X/Y coordinates drive the posture model. Specification seat height is a separate catalog value.
- Seat
- X 465 mm · Y 745 mm
2/2 records · 2/2 linked
1/2 recorded verified - Grips
- X 1,019 mm · Y 1,060 mm
2/2 records · 2/2 linked
0/2 recorded verified - Pegs
- X 755 mm · Y 236 mm
2/2 records · 2/2 linked
0/2 recorded verified
Check on the bike: At a test-sit, prioritize the seat, grips, and pegs positions; one or more of those modeled coordinates is not recorded as verified.
Wheelbase
Chassis
1,695 mm
Recorded verifiedHonda publishes a 1,695 mm wheelbase for the European 2024 Gold Wing Tour.
Ground clearance
Chassis
130 mm
Recorded verifiedHonda publishes 130 mm ground clearance for the European 2024 Gold Wing Tour.
Seat contact X
Rider triangle
465 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Seat contact height
Rider triangle
745 mm
Recorded verifiedHonda publishes a fixed 745 mm seat height for the European 2024 Gold Wing Tour.
Seat length
Rider triangle
320 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Handlebar X
Rider triangle
1,019 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Handlebar height
Rider triangle
1,060 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Handlebar width
Controls
900 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Foot peg X
Rider triangle
755 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Foot peg height
Rider triangle
236 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Passenger seat X
Passenger
196 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Passenger seat height
Passenger
854 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Passenger peg X
Passenger
285 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Passenger peg height
Passenger
334 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Seat height minimum
Adjustability
745 mm
Recorded verifiedHonda publishes a fixed 745 mm seat height for the European 2024 Gold Wing Tour.
Seat height maximum
Adjustability
745 mm
Recorded verifiedHonda publishes a fixed 745 mm seat height for the European 2024 Gold Wing Tour.
Wet weight
Physical
385 kg
Recorded verifiedHonda publishes 385 kg kerb weight for the manual-transmission European 2024 Gold Wing Tour; 390 kg belongs to the DCT with airbag.
Front tire outer diameter
Rendering
639 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Rear tire outer diameter
Rendering
626 mm
Provisional recordInitial calibrated seed value; not yet independently verified.
Bike-level reference: https://hondanews.eu/eu/en/motorcycles/media/pressreleases/451548/24ym-honda-gold-wing-tour
Does the Honda Gold Wing Tour MT fit you?
The Honda Gold Wing Tour MT (2024) lists a 745 mm seat height. In this simplified seat-height model, an inseam around 75 cm is a rough ground-reach reference, not a guarantee of flat-footing. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change foot contact. Enter your measurements above to compare the modeled reach, then confirm it on the motorcycle.
Riding position
The Honda Gold Wing Tour MT's touring category suggests a relaxed, upright touring position as a modeled starting point. The simulator estimates knee, hip, and elbow angles from the available geometry and your measurements so you can compare the reach to the bars and pegs.
Typical category use
The touring category is commonly associated with long-distance and two-up travel, with a relaxed, weather-protected riding position. Rider Height does not assess handling, performance, or whether this motorcycle is suitable for a particular rider.
Fit figures are planning estimates from the current geometry and simplified model assumptions. They are not safety, compatibility, or purchase advice; confirm fit on the actual motorcycle.
Bikes similar to the Honda Gold Wing Tour MT
Other touring motorcycles with the closest seat heights — compare their fit in the simulator.