What riding position does the KTM 50 SX Factory Edition have?

The KTM 50 SX Factory Edition's motocross category suggests a tall, forward-ready seated position as a modeled category starting point. Rider Height estimates joint angles from the available geometry and your measurements in a static seated solve. Standing positions are not modeled.

<- All bikes

KTM 50 SX Factory Edition

Name: KTM 50 SX Factory Edition
Brand: KTM

2026 | motocross

Provisional0/19 fields

Checking device garage…

No public bike photo yet

Visual reference

Side profile

Seat height: 653 mm
Wheelbase: 1,024 mm
Wet weight: -
Category: motocross

See current listings ->

Listing links may earn Rider Height a commission.

Asset: Pending
Dimensions: -
License: -
Source: -

KTM

50 SX Factory Edition

2026+motocross50 cc

3D SceneKTM 50 SX Factory Edition

Loading scene…

Saved builds stay on this device.

Rider

Height: 183 cmChanging height adjusts inseam proportionally within valid limits.

Inseam: 85.5 cmInseam cannot exceed your current height.

Rider position

Slide the rider on the seat to fit this bike. Saved per bike.

Seat fore/aft: 0 mm

Seat height delta: 0 mm

Posture

Arm straightness: 95%

Seat position

Feet down

Adjustments

Bar rise: 0 mm

Bar pullback: 0 mm

Peg forward: 0 mm

Peg rise: 0 mm

Ergonomics

Modeled band: Comfortable

Geometry verification: Provisional

Data basis: Published specs · estimated rider contacts

Layout basis: Generic fallback

Generic rider contacts are not measured for this model or category.

All contacts reached

Lowest modeled angle area: Knee.

Physical check: Sit on the exact motorcycle and compare seat, bar, peg, and ground-reach feel before deciding. This model does not predict comfort or control.

Modeled comparison score: 95 / 100

Knee57.2 deg / Sport

Ideal 75 deg to 105 degL 57.2 deg / R 57.2 deg

Hip103.9 deg / Neutral

Ideal 85 deg to 125 degL 103.9 deg / R 103.9 deg

Elbow143.3 deg / Relaxed

Ideal 110 deg to 170 degL 143.3 deg / R 143.3 deg

Torso lean5.4 deg / Neutral

Ideal -5 deg to 25 deg

Seat height

653 mm

Wheelbase

1024 mm

Weight (wet)

—

Ground clearance

231 mm

Loading simulator...

Data provenance

Where these numbers came from

Every populated geometry field records its source, verification state, and source link when available. These records feed both the simulator and the fit recommendation engine.

Provisional0/19 fieldsMethodology

Geometry status: Provisional
Field records: 19
Verified fields: 0/19
Linked sources: 19/19

Category-based provisional contact geometry: 13Published manufacturer/manual spec: 62 source labels

Field-level geometry provenance for KTM 50 SX Factory Edition
Field	Value	Source	Status	Notes
WheelbaseChassis	1,024 mm	Published manufacturer/manual spec	Provisional	Manually entered from published specs for the live fallback catalog; not independently verified.
Ground clearanceChassis	231 mm	Published manufacturer/manual spec	Provisional	Manually entered from published specs for the live fallback catalog; not independently verified.
Seat contact XRider triangle	512 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Seat contact heightRider triangle	653 mm	Published manufacturer/manual spec	Provisional	Manually entered from published specs for the live fallback catalog; not independently verified.
Seat lengthRider triangle	230 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Handlebar XRider triangle	778 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Handlebar heightRider triangle	833 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Handlebar widthControls	790 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Foot peg XRider triangle	573 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Foot peg heightRider triangle	288 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger seat XPassenger	420 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger seat heightPassenger	708 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger peg XPassenger	481 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Passenger peg heightPassenger	473 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Seat height minimumAdjustability	653 mm	Published manufacturer/manual spec	Provisional	Manually entered from published specs for the live fallback catalog; not independently verified.
Seat height maximumAdjustability	653 mm	Published manufacturer/manual spec	Provisional	Manually entered from published specs for the live fallback catalog; not independently verified.
Dry weightPhysical	44 kg	Published manufacturer/manual spec	Provisional	Manually entered from published specs for the live fallback catalog; not independently verified.
Front wheel diameterRendering	425 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.
Rear wheel diameterRendering	394 mm	Category-based provisional contact geometry	Provisional	Rider contact point estimated from category proportions until side-profile landmarks are authored.

Bike-level reference: https://www.cyclenews.com/2025/08/article/new-2026-ktm-sx-sx-f-models-specs/#2026-ktm-50-sx-factory-edition-specifications

Does the KTM 50 SX Factory Edition fit you?

The KTM 50 SX Factory Edition (2026) lists a 653 mm seat height. In this simplified seat-height model, an inseam around 65 cm is a rough ground-reach reference, not a guarantee of flat-footing. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change foot contact. Enter your measurements above to compare the modeled reach, then confirm it on the motorcycle.

Riding position

The KTM 50 SX Factory Edition's motocross category suggests a tall, forward-ready seated position as a modeled starting point. The simulator estimates knee, hip, and elbow angles from the available geometry and your measurements so you can compare the reach to the bars and pegs.

Typical category use

The motocross category is commonly associated with closed-course motocross riding, jumps, and rough terrain rather than road use. Rider Height does not assess handling, performance, or whether this motorcycle is suitable for a particular rider.

Fit figures are planning estimates from the current geometry and simplified model assumptions. They are not safety, compatibility, or purchase advice; confirm fit on the actual motorcycle.

Other motocross motorcycles with the closest seat heights — compare their fit in the simulator.

KTM 50 SX Factory Edition

Side profile

Rider

Rider position

Posture

Adjustments

Ergonomics

Where these numbers came from

Does the KTM 50 SX Factory Edition fit you?

Riding position

Typical category use

Bikes similar to the KTM 50 SX Factory Edition

Rider

Rider position

Posture

Adjustments

Ergonomics