Yamaha Tenere 700
2025 | dual-sport
Checking device garage…
Visual reference
Side profile
- Seat height
- 875 mm
- Wheelbase
- 1,595 mm
- Wet weight
- 208 kg
- Category
- dual-sport
Listing links may earn Rider Height a commission.
- Asset
- Pending
- Dimensions
- -
- License
- -
- Source
- -
Data provenance
Where these numbers came from
Every populated geometry field records its source, verification state, and source link when available. These records feed both the simulator and the fit recommendation engine.
- Geometry status
- Partially verified
- Field records
- 19
- Verified fields
- 6/19
- Linked sources
- 19/19
| Field | Value | Source | Status | Notes |
|---|---|---|---|---|
| WheelbaseChassis | 1,595 mm | Yamaha 2025 Ténéré 700 factsheet | Verified | Yamaha publishes a 1,595 mm wheelbase for the standard 2025 Ténéré 700. |
| Ground clearanceChassis | 240 mm | Yamaha 2025 Ténéré 700 factsheet | Verified | Yamaha publishes 240 mm ground clearance for the standard model; the separate factory-low version is 225 mm. |
| Seat contact XRider triangle | 495 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Seat contact heightRider triangle | 875 mm | Yamaha 2025 Ténéré 700 factsheet | Verified | Yamaha publishes an 875 mm standard seat height; the separate factory-low version is 860 mm. |
| Seat lengthRider triangle | 320 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Handlebar XRider triangle | 995 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Handlebar heightRider triangle | 1,205 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Handlebar widthControls | 905 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Foot peg XRider triangle | 562 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Foot peg heightRider triangle | 385 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Passenger seat XPassenger | 262 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Passenger seat heightPassenger | 918 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Passenger peg XPassenger | 283 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Passenger peg heightPassenger | 542 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Seat height minimumAdjustability | 875 mm | Yamaha 2025 Ténéré 700 factsheet | Verified | Yamaha publishes an 875 mm standard seat height; the separate factory-low version is 860 mm. |
| Seat height maximumAdjustability | 875 mm | Yamaha 2025 Ténéré 700 factsheet | Verified | Yamaha publishes an 875 mm standard seat height; the separate factory-low version is 860 mm. |
| Wet weightPhysical | 208 kg | Yamaha 2025 Ténéré 700 factsheet | Verified | Yamaha publishes 208 kg wet weight including full oil and fuel tanks. |
| Front wheel diameterRendering | 695 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
| Rear wheel diameterRendering | 667 mm | Cycle Ergo seed geometry | Provisional | Initial calibrated seed value; not yet independently verified. |
Bike-level reference: https://www.yamaha-motor.eu/gb/en/motorcycles/adventure/pdp/t-n-r-700
Does the Yamaha Tenere 700 fit you?
The Yamaha Tenere 700 (2025) lists a 875 mm seat height. In this simplified seat-height model, an inseam around 88 cm is a rough ground-reach reference, not a guarantee of flat-footing. Seat width, suspension sag, boots, mobility, load, and individual proportions can materially change foot contact. Enter your measurements above to compare the modeled reach, then confirm it on the motorcycle.
Riding position
The Yamaha Tenere 700's dual-sport category suggests a tall, upright seated position as a modeled starting point. The simulator estimates knee, hip, and elbow angles from the available geometry and your measurements so you can compare the reach to the bars and pegs.
Typical category use
The dual-sport category is commonly associated with on/off-road versatility and lighter trail use, usually with a tall seat. Rider Height does not assess handling, performance, or whether this motorcycle is suitable for a particular rider.
Fit figures are planning estimates from the current geometry and simplified model assumptions. They are not safety, compatibility, or purchase advice; confirm fit on the actual motorcycle.
Bikes similar to the Yamaha Tenere 700
Other dual-sport motorcycles with the closest seat heights — compare their fit in the simulator.